This is the steel Pin that goes into the lid of the Slicer/Shredder and turns the blades. The cap is the grey piece that fits on the top of the Slicer/Shredder's lid.
Image shows detail of the metal stabilizing pin (long fluted metal part) and the plastic bushing cap (upper part, dark gray) as they are mounted in the lid of the Universal Slicer Shredder. Replacement lids include the plastic bushing cap but not the metal stabilizing pin. You can re-use your stabilizing pin if it's in good condition or you can purchase a new stabilizing pin with cap (see above.) The dark gray plastic bushing cap also is available by itself (see above) without stabilizing pin or lid.